Home / PPF Guides / Color PPF trial-panel decision record
Key takeaways
- Name the vehicle or test piece and exact panel before adding observations.
- Record the product name, code, finish and physical sample reference together.
- Use a wide context image plus two panel angles.
- Write observed appearance in plain visual terms tied to the photographs.
- End with one dated decision and the next record reference.

What belongs in the record?
Connect the trial application to a specific object and a specific decision. A useful record begins with the vehicle or test-piece reference, exact panel, named Color PPF product and date. It then links the physical sample or batch reference when one is available, the observation views, photo filenames, visible appearance and the next action.
Avery Dennison’s current PrismaPro page invites installers to experience the product on a test panel and request an identified sample pack. 3M’s current PPF installation bulletin names its covered product series and substrate category, while 3M’s vehicle color-change record pairs the vehicle, coverage, material used, date and photographs. Together, those sources support a practical record structure: identify the item, identify the surface, keep dated photographs and state the resulting project decision. Their product specifications remain specific to their own brands.
This record starts after a candidate has been identified. A sample request asks for the physical material. A product-page check establishes the listing identity. The trial-panel record adds the selected vehicle surface or test piece and what the team decided after reviewing it.
Which identities must be connected?
Use one line for the project object and one line for the material. For the example below, the vehicle reference is TP-6004, the observation area is the front-left fender and adjacent bumper edge, and the named product is 6004 – Flowing Black Charming Red. The record should repeat the same code in the photograph folder and decision row.
| Field | Example entry | Purpose |
|---|---|---|
| Project object | TP-6004 Honda; front-left fender | Locates the exact review area |
| Named product | 6004 – Flowing Black Charming Red | Connects photos to the live product identity |
| Finish | Use the current product-page wording | Keeps the sample and listing aligned |
| Sample reference | Shop’s identified physical piece | Links the material handled to the record |
| Date and view set | 2026-10-11; context, close and high angle | Creates a repeatable photo group |
| Decision | Continue, change or pause | Turns observation into the next project action |
If the candidate changes, open a selected-product change record. If the panel coverage changes, use the scope-change record. Keeping those events separate prevents a material change from being mistaken for a coverage change.

Which photographs make it useful?
Use three roles: context, panel and changed angle. The context image shows the whole vehicle and identifies the side. The panel image fills the frame with the trial area. The changed-angle image moves the camera enough to show a different reflection across the same surface. Add a high view when the hood or upper fender belongs in the comparison.

The photo appearance guide explains why lighting and angle belong in the record. The pre-installation photo record captures the vehicle as received; this trial record is narrower and centers on the chosen panel and product. A consultation photo set can help prepare the wide views, but the shop should create a fresh dated set when it reviews the panel.

What does a completed example look like?
Use an entry that a customer or project manager can understand later without the original chat thread. Keep the wording visual. For example: “On October 11, 2026, the shop reviewed product 6004 on the TP-6004 front-left fender area. File TP-6004_FL_context_01 identifies the vehicle; TP-6004_FL_close_02 and TP-6004_FL_high_03 show the observed red-to-dark shift from two angles. Decision: continue to a written scope using 6004 as the selected candidate.”
| Record section | Completed example | Next reference |
|---|---|---|
| Vehicle / panel | TP-6004 Honda; front-left fender | Same ID on scope map |
| Product | 6004 – Flowing Black Charming Red | Live product URL and sample code |
| Views | Context, wheel-level close, high front | Files 01–03 |
| Observed appearance | Red-to-dark shift changes across the three recorded angles | Use the same words in customer copy |
| Decision | Continue to written scope | Scope version TP-6004-v1 |
| Open item | Rear-quarter appearance to be reviewed separately | New record, not an edit to this panel |
Keep incoming material checks in the incoming-roll record. Keep delivery details in the handover record. If the project uses several rolls, the multi-roll project guide supplies a separate material identity path. Those documents may share the project reference while answering different questions.
How should the shop record the decision?
Use one of three verbs: continue, change or pause. “Continue” names the next scope reference. “Change” names the outgoing and replacement candidates and starts a fresh comparison. “Pause” names the one missing input, such as the current product document, surface identity or customer choice. A single clear verb keeps the record useful.
The written quote guide begins after the material and panel scope are ready to compare. The seam preview handles a proposed film transition, and the front-bumper preview maps that assembly. For a customer-facing physical sample path, link the exact piece through sample kits rather than relying on a color nickname.
Use Project Collaboration to keep the named product, panel photos and next decision in the same project discussion.
What are the three next paths?
External reading: Avery Dennison PrismaPro Color PPF and sample pack; 3M PPF Installation Guidelines, Revision E, September 2026; 3M Vehicle Color Change Instruction Bulletin, Revision A; UVRA dealer sample front-fender example; AT Customs physical sample comparison page.
Frequently asked questions
What is the minimum useful Color PPF trial-panel record?
Record the vehicle or test-piece ID, exact panel, named product and code, date, two observation views, photo filenames, observed appearance and one decision: continue, change product or pause.
Should a trial-panel record include a pass or fail score?
Use a project decision tied to the stated comparison goal. Add a numeric threshold only when it comes from the current named product document or an existing written project requirement.
How is a trial-panel record different from sample approval?
Sample approval identifies the physical candidate. A trial-panel record adds the actual panel or test piece, observation photographs and the decision made after that application.
Which photos belong with the record?
Include a wide vehicle-context view, a close panel view and a second angle that changes the reflection. Keep the product code and date in the filenames or companion record.
What happens after the trial-panel decision?
A continue decision moves to scope confirmation, a change decision names the replacement candidate, and a pause decision records the missing document, surface answer or customer choice.
0 comments