Home / PPF Guides / Pre-installation vehicle photo record
Key takeaways
- Create the record when the vehicle is received, before installation work begins.
- Use repeatable wide views before adding close details.
- Tie every filename to the project reference, view and capture date.
- Keep vehicle condition, product identity and panel scope as separate linked records.
- Include mileage or interior fields only when they serve the agreed intake record.
What makes the record complete?
A useful pre-installation record makes the vehicle recognizable, shows its exterior from repeatable angles and connects every detail photo to a place on the vehicle. The shop should be able to open the folder later and understand what arrived, when it was photographed, which Color PPF project it belongs to and which visible item each close-up records.
This record begins after the vehicle reaches the shop. The existing consultation-photo guide helps an owner send a compact remote photo set before that point. A handover record documents the completed project. The intake set sits between them and uses shop-created, dated images of the actual vehicle received.

Primary technical records support this structure. The 3M Auto and Van Graphics Pre-installation Inspection Record, Revision A dated December 2024, instructs installers to use a separate record for each vehicle and installation and to mark observed problem areas. Avery Dennison’s Application Examination Form includes vehicle identity, installation date, film material, coverage and attached pre- and post-installation photos. These are vehicle-graphics documents from their publishers; the practical pattern here is a distinct vehicle record with photographs and identifiers.
Which views should the shop capture?
Capture wide views in a fixed order so missing angles are easy to spot: front, front-left, full driver side, rear-left, rear, rear-right, full passenger side and front-right. A roof or high-angle view can be added when roof coverage or a roof accessory matters. The wide set establishes orientation before the record moves to details.
| View | Frame it to show | Suggested view code |
|---|---|---|
| Front | Entire bumper, hood, lamps and both front corners | front-wide |
| Driver side | Complete side from bumper to bumper at a level angle | driver-side-wide |
| Rear | Entire rear, deck or tailgate, glass, lamps and lower bumper | rear-wide |
| Passenger side | Complete opposite side at a comparable distance | passenger-side-wide |
| Three-quarter | Panel depth, curves and transitions at each end | front-left / rear-right |
| Roof or high view | Roof panel, glass roof, antenna and roof accessories | roof-high |

Keep the vehicle centered and avoid cropping a bumper or wheel from a wide view. GRAPHICS PRO’s pre-wrap planning article recommends straight-on photos of all sides at an even eye level to reduce distortion, then separate photos for obstacles or visible paint conditions. A current vehicle intake example from CT Custom Signs similarly requests front, rear, both sides, hood or roof and each damaged area.

How should detail photos be recorded?
Each detail image needs two anchors: one wider locator image and one close view. If a mark appears near the driver door handle, first keep the full driver-side photo in the set, then capture the handle area closely. Write the same panel and location words in the filename and note. This prevents an isolated close-up from becoming a puzzle.
Detail subjects may include visible chips, scratches, dents, repaint boundaries, badges, sensors, aftermarket accessories, panel gaps, handles or trim that affects the agreed visual scope. Describe only what is visible in the photograph. A photo can show a mark or component; it does not by itself decide its cause, repair status or material suitability.

Interior or mileage images belong in the set only when the intake procedure uses them. If mileage is recorded, capture a readable instrument display with the project reference and date in the record. If keys, charging adapters or removable accessories are logged, use a labeled overview rather than a collection of unexplained close-ups. Keep the customer-shared version aligned with the shop record.
What should filenames and fields contain?
Use filenames that sort together and remain useful outside the gallery app. A practical pattern is project-view-detail-date. For example: NP-1047_driver-door_handle-detail-02_2026-10-09.jpg. Use a separate field table for information that does not belong in the filename.
| Record field | Example | Use |
|---|---|---|
| Project reference | NP-1047 | Joins photos, product and scope records |
| Capture date/time | 2026-10-09, 09:35 | Identifies the intake session |
| Vehicle identity | Customer vehicle; shop intake reference | Separates similar vehicles |
| View code | rear-left-wide | Makes angle coverage sortable |
| Visible item | Driver door, handle recess | Connects detail to a panel location |
| Selected product | 2042 – Metal Silver | Links the current named choice |
| Scope version | panel-map-v2 | Points to the separate coverage record |
| Customer-share set | NP-1047-intake-share-v1 | Identifies the readable shared copy |
The vehicle in this example is filed in the approved NEOPPF library under the active product 2042 – Metal Silver. The wide and detail photographs demonstrate record structure. For another vehicle, use the selected product identity that actually belongs to that project and retain the current product-page link or sample reference.
Which records stay separate?
Keep four records linked by project reference rather than combining them into one overloaded document. The intake photo record shows the vehicle as received. The product record identifies the selected film and any later product change. The visual scope preview marks proposed boundaries. A scope-change record preserves a later revision.
This separation makes the intake folder useful even when the product or coverage plan changes. It also prevents a visible condition note from being mistaken for product approval or completed-work acceptance. The shop can share a clear photo set through its normal project-collaboration path while retaining the exact same project reference.
How can a shop keep the record readable?
Use one folder for original captures, one customer-share folder and one index table. Do not edit away visible items in the originals. If the customer-share images are resized, keep the project reference, view code and date in the filename. A short index can list missing angles, explain why a mileage field is present and link to the current product and panel-map versions.
Several wrap businesses publish similar operational patterns. Performance Syndicate describes photographing existing defects before work; MassWraps describes photographing the vehicle and damage at intake. Their services and commercial terms belong to those businesses. The transferable practice is to make the vehicle, angle, location and date retrievable.
Project reference, intake date, vehicle identity, front and rear, both full sides, useful three-quarter views, located detail photos, selected-product identity, scope-version link and a short index of visible items.
For the linked records, use the current Color PPF collection, the written quote structure and the existing guides for repainted-vehicle inspection, visible paint imperfections and installer records and scope. Each link answers a different decision while the intake photo folder remains the factual visual starting point.
Next step: Start the project with a dated vehicle photo record and use the same reference on the selected product and panel-scope documents.
Frequently asked questions
How many wide vehicle views belong in the intake record?
Use at least the front, rear and both full sides, then add front and rear three-quarter views when they clarify curved panels or accessories. The required count should follow what the actual vehicle needs to show.
What belongs in every photo filename?
Use the project reference, view name and capture date. Add a sequence number when several detail images cover one panel, such as NP-1047_driver-door_detail-02_2026-10-09.jpg.
Should the intake record replace the panel scope drawing?
Keep them separate. Intake photos record the vehicle as received; the scope drawing records proposed coverage, boundaries and versions. Link the two with the same project reference.
When should a mileage or instrument photo be included?
Include it when the shop and customer use mileage as an intake field, and record it in the customer-shared version. The field should serve a defined project purpose rather than appear as an unexplained image.
How is this different from photos sent for a remote consultation?
Remote consultation photos help start a conversation before the vehicle arrives. A pre-installation record is created at intake, dated by the shop and tied to the actual vehicle, selected product and project reference.
Sources used: 3M Pre-installation Inspection Record, Rev. A; Avery Dennison Application Examination Form; GRAPHICS PRO pre-wrap planning; CT Custom Signs vehicle intake; Performance Syndicate documentation process; MassWraps process.
0 comments