Key Takeaways:
- The training connected material knowledge with hands-on vehicle practice.
- Dry and wet application were taught as product-led workflows with different positioning and handling needs.
- Curves, recesses, edges and panel transitions received focused attention.
- Clean working conditions and organized tools supported every practice stage.
- The visit created time for technical exchange between NEOPPF, WrapMasters and Advance8.
What brought the teams together in Guangzhou?
The visit created a shared workshop for practicing TPU color change film installation and discussing how different application systems behave on a real vehicle. On the morning of September 1, 2026, participants from WrapMasters and Advance8 joined the NEOPPF team in Guangzhou, China. LIN led the session with eight years of industry experience and kept the day centered on repeatable workshop habits rather than a classroom-only presentation.
The program combined demonstrations, guided practice and group discussion. Participants could see how positioning, tension, squeegee control and inspection connect across a complete panel workflow. The format also gave the visiting teams space to compare their own experience with the methods shown in the training bay.
This event recap has a different purpose from NEOPPF's installer-selection guide. It records what happened during one specific training session. Shops planning their own product decisions can review the current Color PPF collection, compare physical film samples and use the dealer application to start a business conversation.
How was the training session organized?
The session moved from material and workspace preparation to method-specific demonstrations, participant practice and a final review. That sequence kept every technique connected to the exact film being handled and the panel in front of the group.
| Training stage | Main focus | What participants observed |
|---|---|---|
| Workspace setup | Clean bay, organized tools and prepared surfaces | How the environment supports controlled handling |
| Method briefing | Film-specific dry or wet application route | Why the current instructions come before personal habit |
| Panel demonstration | Positioning, pressure, tension and body lines | How decisions change across flat areas, curves and recesses |
| Guided practice | Participant tool movement and film response | How small corrections affect the next step |
| Final review | Edges, moisture, surface consistency and visible details | How a systematic inspection closes the exercise |
What did the dry-application practice emphasize?
The dry-application segment focused on positioning the film before pressure, managing direct adhesive contact and reading tension across the panel. Participants worked through alignment, controlled squeegee movement and the transition from open film to committed contact. Curves, recesses and edges became the main teaching areas because they make tension and handling decisions visible.
LIN emphasized restraint during repositioning and stretching. The goal was to let the group observe how the film responded before adding more pressure or tension. That approach kept the lesson centered on control: establish the position, watch the material, then advance across the panel in a deliberate sequence.
Dry application depends on the named product system. Avery Dennison's current PrismaPro training resource hub, for example, is built around that product's dry-apply workflow and pairs video modules with technical documents. It provides useful industry context for product-specific training; its instructions apply to PrismaPro rather than defining every TPU color change film.
Alignment before pressure, direct tack control and deliberate tension management.
Solution-supported positioning, overlapping squeegee passes and moisture checks.
Clean preparation, organized tools, controlled movement and final inspection.
What did the wet-application practice emphasize?
The wet-application segment focused on positioning with the specified application liquid, moving moisture with overlapping squeegee strokes and checking detailed areas before the panel review. Participants observed how the liquid-supported positioning stage changes the early part of the workflow while still requiring a controlled path across the panel.
The lesson started with surface preparation and solution choice for the film being demonstrated. The group then followed alignment, anchoring and overlapping passes, paying close attention to edges and detailed areas where remaining moisture is easier to miss. The session treated solution choice as part of the product system rather than a shop-wide recipe.
Avery Dennison's Supreme PPF application bulletin illustrates that distinction for a named wet-application family: it specifies the matching liquid, positioning sequence and overlapping squeegee strokes for those products. The Guangzhou training followed the same core discipline of matching technique to current product guidance.
| Practice point | Dry-application focus | Wet-application focus |
|---|---|---|
| Initial positioning | Set alignment before committing pressure | Use the specified liquid-supported positioning window |
| Squeegee path | Advance through controlled contact | Use overlapping passes to move liquid and air |
| Tension | Read film response before adding stretch | Keep alignment while working moisture outward |
| Detailed areas | Watch tack, curves and recess transitions | Recheck moisture around edges and details |
| Reference point | Follow the current instructions for the exact film used in training | |
Which details connected both methods?
Clean preparation, careful tool handling, controlled tension and a deliberate final inspection connected both practice paths. These workshop habits gave the group a common language even when the application method changed.
Tool organization mattered because the next squeegee, glove or cleaning item could be reached without interrupting the demonstration. Panel observation mattered because a technique that feels comfortable on a broad area may need adjustment near a body line. Final inspection mattered because it brought the lesson back to the whole panel instead of one successful movement.
Related NEOPPF resources extend those operational themes. The pre-installation guide covers vehicle and workspace questions. The incoming-roll checklist keeps product identity and visible condition connected. The Color PPF storage guide addresses material handling before a job, while the installation handover checklist organizes the record after the work is complete.
What did the teams take from the session?
The day ended with a shared record of the training and a stronger working connection between the teams. The certificate photographs mark the close of the session, while the workshop images show the practical work that came before them. Together, they document a visit built around technical exchange, focused practice and professional relationships.
For shops and partners, training is most useful when it connects the exact material, the people handling it and the records that travel with the project. The Color PPF product-page guide explains how to capture product identity. The sample-request checklist helps prepare a named physical comparison, and the written-quote checklist keeps the later project scope separate from a training record.
NEOPPF was pleased to host WrapMasters and Advance8 in Guangzhou. Businesses interested in product, dealer or collaboration discussions can use the project collaboration page, visit the dealer map or send a specific question through NEOPPF contact. For larger material planning, the multi-roll project guide provides a separate route for documenting the proposed scope.
Frequently asked questions
When and where did the TPU color change film training take place?
The session took place on the morning of September 1, 2026, at the NEOPPF training facility in Guangzhou, China.
Who joined the Guangzhou training?
NEOPPF welcomed visitors from the Japanese companies WrapMasters and Advance8 for the workshop.
Who led the training session?
LIN led the session, drawing on eight years of industry experience to connect demonstrations with practical panel work.
Did the program cover both dry and wet application?
Yes. The session included dry-application and wet-application practice, with each method connected to the film system being demonstrated.
How can a shop start a conversation with NEOPPF?
Shops can review the dealer application or project collaboration page and send their product, market and training-support questions through the listed contact route.
References
- NEOPPF event brief and eight owner-provided photographs from the September 1, 2026 Guangzhou session.
- Avery Dennison PrismaPro training and video resource hub, accessed September 24, 2026; product-specific dry-application training context.
- Avery Dennison Instructional Bulletin 1.15, June 2024; product-specific wet-application workflow.
- Avery Dennison dry-apply PPF training page, accessed September 24, 2026; current hands-on training structure.
Share your market, film interests and support questions with the NEOPPF team.
Start a dealer conversation
0件のコメント