Home / PPF Guides / Two-tone Color PPF layout comparison
Key takeaways
- Use the same vehicle and matched views for both layouts.
- Name both Color PPF products, codes and finishes before comparing.
- Change one zone at a time so the visual difference has one cause.
- Label roof, pillars, mirrors, spoiler and lower body separately.
- Carry the chosen version into the written panel scope.

What makes the comparison fair?
A fair comparison holds the vehicle, camera position, named materials and panel boundaries constant. Version A might assign the contrasting film to the roof only. Version B might extend that same film through the roof, pillars and mirrors. Because the body product and vehicle views stay fixed, the owner can see exactly what the added zone changes.
This approach improves on a mood board assembled from different cars and lighting. It also serves a different decision from a finish-to-finish comparison: the main question here is where each product appears on one vehicle. The selected products still need exact identities. In the example below, the base direction is 4004 – Liquid Metallic Jedi Pink and the proposed contrast is 3075 – Super Black.
Avery Dennison’s current Color PPF page connects product selection with physical sample packs and a live test panel. Its neo Color PPF data sheet lists hood and roof accents among product uses. Those named Avery sources describe Avery products; for this NEOPPF example, the usable principle is to keep product identity and the chosen vehicle zone together in the comparison record.
Which inputs must stay fixed?
Lock five inputs before marking either version: the vehicle photo set, base product, contrast product, view names and component vocabulary. If the side view calls a surface “C-pillar,” the rear view and decision table should use the same term. If one version includes mirror caps, show that row in both versions and change only its proposed color.
| Input | Keep fixed | Change deliberately |
|---|---|---|
| Vehicle | Same vehicle and body configuration | Nothing |
| Views | Same front, side and rear angles | Only the layout overlay |
| Products | 4004 base and 3075 contrast | Which zone receives 3075 |
| Boundaries | Actual roof, pillar, door and quarter lines | Chosen stop line between zones |
| Version label | Same project reference | A or B plus date |

Build the first shortlist with the live Color PPF collection, then connect each candidate to an identified piece from sample kits. The product-page check helps keep the listing identity separate from the sample reference. The photo appearance guide explains why the same marked views matter when screen images are compared.
Which vehicle views should match?
Use a side view as the master layout, then confirm it from front and rear three-quarter views. The side view shows the longest continuous boundary. The front view reveals what happens at the hood, fenders, A-pillars and mirrors. The rear view shows whether the roof zone connects cleanly to the rear glass surround, trunk or liftgate and spoiler.

Keep detailed component questions in their own records. A rear-spoiler preview handles the spoiler as a distinct part. A front-bumper preview maps the front assembly. A mirror-and-handle guide deals with those smaller accents. The two-tone sheet can link to those records without crowding every detail into one image.
What does a one-variable example look like?
For project TT-4004, use the same side, front and rear photos in both versions. Both versions keep 4004 Liquid Metallic Jedi Pink on the hood, doors, fenders and quarters. Both use the same identified 3075 Super Black sample. Version A puts 3075 on the roof. Version B extends 3075 to the A-, B- and C-pillar zone and mirror caps. No other panel changes.
| Component | Version A | Version B | Decision note |
|---|---|---|---|
| Roof panel | 3075 Super Black | 3075 Super Black | Fixed in both |
| A/B/C pillars | 4004 base direction | 3075 contrast direction | Only major changed zone |
| Mirror caps | 4004 | 3075 | Ties to pillar choice |
| Hood, doors, quarters | 4004 | 4004 | Fixed in both |
| Rear spoiler | Separate line | Separate line | Choose after rear view |

If the chosen layout changes after the initial scope, record that in the scope-change record. If the split introduces a visible film transition, use the seam preview. The written quote guide then carries the selected panel list into a comparable commercial document.
How should the decision be recorded?
Save the selected version with a short sentence: “TT-4004 version B selected on October 11, 2026: 4004 Liquid Metallic Jedi Pink remains on the main body; 3075 Super Black is assigned to the roof, pillars and mirror caps; spoiler remains a separate decision.” Attach the three marked views, both product links and the physical sample references. This makes the layout readable when the photos are separated from the original conversation.
The consultation photo checklist can supply a consistent vehicle set, while the door-jamb guide handles the open-door boundary separately. Owners comparing a light base can also use the white Color PPF comparison as an example of keeping an exact product identity beside the actual vehicle.
Review current options in the Color PPF collection, then take the selected version and physical samples into a vehicle-specific scope discussion through the dealer map.
What is the comparison path?
External reading: 3M Vehicle Color Change Instruction Bulletin, Revision A, December 2024; Avery Dennison PrismaPro Color PPF; Avery Dennison neo PPF PDS, Revision 3; Mohammed Lexus two-tone project; Car Wrappers contrast-roof guide.
Frequently asked questions
What makes two two-tone layouts directly comparable?
Use the same vehicle, the same front, side and rear views, the same two named films and the same panel map. Change only the zone assigned to the second film.
Which view should lead a two-tone Color PPF comparison?
Lead with a clean side view because it shows roof, pillars, doors, quarter panel and lower body in one frame. Confirm the choice with front and rear three-quarter views.
Should mirrors and spoilers be grouped with the roof automatically?
Give each one its own row. A mirror cap or spoiler can follow either color direction, and that one choice may change how the layout connects from front to rear.
How should a physical sample be linked to the preview?
Record the exact product name, code and finish beside each layout, then attach the physical sample reference used during the comparison.
When is a two-tone layout ready for a written scope?
Move forward when the chosen version identifies every changed panel and accent, names both products, carries a version date and reads consistently across all marked views.
0 comments